Microfiber Steam Mop Cloth for Vileda Ultramax 155747 Ultramat 2in1 Mop Vacuum Cleaner Mop Pads Accessories

1. Golden Ratio of 80% Polyester + 20% Nylon
0.1 μm split microfiber, with a single filament fineness just 1/100th that of ordinary rayon, increases surface contact area 40 times, instantly removing dust, oil film, and footprints.
Nylon gives the mop exceptional absorbency, instantly locking in 400 ml/m² of moisture. A 50 m² commercial lobby only needs one fill, with no dripping or back-contamination.

2. Three-step high-temperature setting + antibacterial finish
200°C drum heat pressing for 45 seconds results in a uniform 30° fiber fall angle, creating a "scooping" dust removal structure that eliminates entanglement with pet hair. Containing silver ion antimicrobial masterbatch, SGS JIS Z 2801 testing demonstrates an antibacterial rate of ≥ 99.9% against Staphylococcus aureus and Escherichia coli. Even after 100 consecutive machine washes, this product maintains a 95% or higher resistance, meeting the high standards of hospitals and kindergartens.

3. Steam, Chlorine, and Alkali Resistance
The fiber surface is modified with a special silicone, allowing it to withstand 500 hours of continuous operation in saturated steam at 140°C with a strength retention rate of ≥ 90%. This significantly surpasses the industry bottleneck of conventional mops that pulverize after 200 hours at 120°C.
Compatible with sodium hypochlorite and sodium hydroxide, commonly found in commercial floor cleaners, the loss in breaking strength is less than 5% after immersion for 24 hours, addressing the problem of "hardening with each wash."

1. Two-in-one Velcro + Elastic Drawstring Construction
The 25 mm wide mushroom closure on the front provides 100% adhesion to Vileda Ultramax and Ultramat baseplates, ensuring smooth, 180° high-speed swinging.

2. Laser Cutting + Ultrasonic Edge Banding
The dimensions are 290 × 165 mm, with a tolerance of ±2 mm. Laser positioning ensures R5-degree corner radius and zero interference with the original soleplate.
Ultrasonic wireless edge banding eliminates the risk of yarn shedding, eliminating complaints from star-rated hotels regarding "thread looseness."

3. Double-sided, two-color design
The red side is woven with 0.3 mm gray wear-resistant yarn, suitable for rough tiles and garage epoxy floors. The white side is ultra-soft, long-pile, suitable for waxing and polishing marble and wood floors. One piece replaces two, reducing on-site replacement time by 50%. Color differentiation reduces cross-contamination risk, meeting EU HACCP color management standards and ensuring safe use in food factories and restaurant kitchens.